NOVRITSCH Support
  • Back to the shop
  • Switzerland – Fedpol Permission required

    • February 11, 2021
    • [email protected]

    If you are planning to order an airsoft gun to Switzerland, your first step should be to look into getting an import permit from Fedpol. When filling in the document for Fedpol, you will need to put some product information.Here is a little guide to help you: Type/Art: Airsoft Rifle…

  • Paint Jobs & Warranty

    • February 8, 2021
    • [email protected]

    Many of you would like to change the look of your pistol or rifle. We have seen really nice designs from you already. We often get the question, if painting the gun will void the warranty. In general, if the paint/design is applied in a responsible way, it will only…

  • Short Outer Barrel + Suppressor

    • January 27, 2021
    • [email protected]

    We are sometimes getting the question, if it would be an option to use the standard inner barrel when adding the suppressor to the short outer barrel. And yes, we can confirm that this works!

  • Buying Novritsch Products from Other Parties

    • [email protected]

    Please check the following points, if you are planning to buy Novritsch products from another company or second hand. Airsoft Retailers In some countries, Novritsch products are offered by airsoft shops. A list of our retailers can be found here: https://eu.novritsch.com/retailers/ Please keep in mind that if you are buying…

  • Country-Specific Information SSX303

    • January 14, 2021
    • [email protected]

    Overview

  • UK & Ireland Shipments: Brexit and Covid-19

    • December 21, 2020
    • [email protected]

    The situations in logistics is currently quite difficult for UK as well as Ireland. Borders closed due to new Covid-19 outbreak Currently we expecting delays for our shipments to the UK, due to the closing of the Eurotunel as well as the cancelation of air traffic due to the newly…

  • USA – Legal Regulations

    • December 14, 2020
    • [email protected]

    Laws regarding airsoft differ quite a lot from state to state. This page is listing all the regulations we put in place for the United States. General Precaution Ordering an airsoft gun is only possible if you are 18 years or older. After placing your order you will get instructions…

  • Country-Specific Information SSG96

    • November 12, 2020
    • [email protected]

    General

  • Country-Specific Information SSG10

    • November 11, 2020
    • [email protected]

    Overview

  • Country-Specific Information SSX23

    • [email protected]

    Overview

  • Country Specific Information SSR15

    • [email protected]

    Overview

  • Country-Specific Information SSP18

    • [email protected]

    Overview

  • Country-Specific Information SSG24

    • [email protected]

    Overview

  • US Fedex Shipment Duration

    • October 27, 2020
    • [email protected]

    Shipping times might vary, depending on factors like weather, public holidays and unforeseen circumstances. Below you can see an indication of how long it should usually when the package left our warehouse.

  • SSR15 – Dissasembly and Assembly

    • October 25, 2020
    • [email protected]

    The following videos will guide you throught the dissasembly and assembly procoess of the SSR15. Dissasembly Assembly

  • SSG24 – Installation of Drilled Cylinder

    • [email protected]
  • SSG24 – Installation of Left Hand Conversion Kit

    • [email protected]

    As we got many requests by left handed airsoft players, we developed a left hand conversion kit. We are unfortuntey not able to install the kit for you, however we recorded a detailed guide that shows how it is done.

  • SSG24 – Installation of Full Thrust Kit

    • [email protected]

    It is possible to change your SSG24 to a 6.44 System, by installing the Full Thrust Kit. The video below is giving you the necessary guidance for installing it in your rifle.

  • Upgrading the SSG10 A1 to a SSG10 A2

    • [email protected]

    As the internals of both guns are the same, you can easily upgrad your SSG10 A1 to a SSG10 A2 buy adding the A2 stock and the enlarged bolthandle. The following video will show how to change the stock on your SSG10 A1.

  • SSG10 – Installing the Drilled Cylinder

    • [email protected]

    If you want to customize your SSG10, you can install the drilled cylinder in your gun. The following video shows the steps of the installation.

Next
  • Back to the shop